CE 33
CE 33
Fine grouting mortar
Properties
- Stable colours
- Uniform joint appearance
- Easy to apply
- For walls and floors
- For indoor, also for wet rooms
- For ceramic and glass tiles, for porcelain, mosaics
- Fibre reinforced for higher crack resistance
Description
Fine grouting mortar, easy to apply, for filling joints in ceramic wall and floor coverings, glass and porcelain mosaics.
TDS For CE 33
- Step by Step
Preparation and mixing
Adhesive mortar must have set and dried sufficiently and the joints must be free of adhesive residues and dirt. Pour the required amount of CE 33 into a bucket with clean, clear water – use the correct mixing ratio with water as defined on the packaging. Mix with an electric driller until you achieve a homogenous mixture, free of lumps. Leave for 3 minutes to mature, then stir again.
Application
Apply the mortar with a grouting tool on wall or floor in such a way that the joint is completely filled.
Cleaning
After the grout has started to set (fingertest), clean the area by wiping with a wet sponge and little water. The second cleaning should be done in diagonal movements with clean water.
