Drop-in Anchor E / ES
Range of loading: 1,2 kN – 28,6 kN
Range of concrete quality: C20/25 – C50/60
Description
The drop-in anchor E/ES is approved for redundant fastening for non-structural applications in cracked and non-cracked concrete. The anchor sizes with an embedment of 30 mm deep are also approved as single anchor in non-cracked concrete. The Drop-in anchors with an anchorage depth of 25 mm are, however, permitted in pre-stressed hollow core slabs.
The drop-in anchor E/ES is placed into the drill hole in pre-setting installation and expanded reliably by means of a manual or hammer drill setting tool. Using a detachable setting tool with a stop drill bit (ASW) allows for quick and efficient, high volume installations. Using the marking setting tool produces a visible marking on the anchors- leeve which confirms the correct installation.
Advantages
- – Approved for use as multiple fixing in cracked and uncracked concrete
- – Approved as multiple fixing in pre-stressed concrete slabs
- – Approved for use as single fixing in non-cracked concrete (Anchorage depth ≥ 30 mm)
- – Shallow drilling depth, thus low risk of hitting reinforcement strikes (Anchorage depth 25 mm)
- – Quick, rational and efficient installation due to the detachable setting tool with a stop drill bit (ASW)
- – Simple visual inspection with marking tool
- – Many possible applications due to the use of standard metric screws and threaded rods
- – FM approval for the installation of sprinkler systems (M10-M20)1)
- – Suitable for the installation of sprinkler systems according to the requirements of damage prevention VDS, GmbH (M8-M16)1)
- – Fire resistance tested in concrete C20/25 to C50/60
Applications
Suspensions in the area of heating, sanitary and ventilation, anchoring with threaded rods and screws, flat steel, profiled steel.
- Description
Description
