Drop-in Anchor E A4/E HCR
Range of loading: 1,2 kN – 30,4 kN
Range of concrete quality: C20/25 – C50/60
Description
The drop-in anchor E/ES A4 is approved as single anchor in non-crak- ked concrete as well as for redundant fastening use for non-structural applications in cracked and non-cracked concrete.
The drop-in anchor E/ES is placed into the drill hole in pre-setting installation and expanded reliably by means of a manual or hammer drill setting tool. Using a detachable setting tool with a stop drill bit (ASW) allows for quick and efficient, high volume installations. Using the marking setting tool produces a visible marking on the anchor sleeve which confirms the correct installation.The use of coated screws is necessary in order to be able to remove the fixture.
Advantages
-Approved for use as multiple fixing in cracked and uncracked concrete
– Approved for use as single fixing in non-cracked concrete
– Quick, rational and efficient installation due to the detachable setting tool with a stop drill bit (ASW)
– Simple visual inspection with marking tool
– Many possible applications due to the use of standard metric screws and threaded rods
– FM approval for the installation of sprinkler systems (M10-M20)1)
– Suitable for the installation of sprinkler systems according to the requirements of damage prevention VDS, GmbH (M8-M16)1) – Fire resistance tested in concrete C20/25 to C50/60
Applications
Attaching suspended ceilings, ventilation and sprinkler systems, structural steel, brackets, threaded rods.
- Description
Description
