injection adhesive vm-py
Screen Shot 2018-08-29 at 12.14.54 AM
Screen Shot 2018-08-29 at 12.14.46 AM
Screen Shot 2018-08-29 at 12.14.41 AM
Screen Shot 2018-08-29 at 12.14.27 AM
Screen Shot 2018-08-29 at 12.14.20 AM

Injection Adhesive VM-PY

Injection Adhesive VM-K
Chemical Anchor V

Range of loading: 0,3 kN – 39,4 kN Concrete quality: C20/25 – C50/60 Masonry: Solid brick, Hollow block

Description

The Injection Adhesive is a polyester-resin based injection mortar for bonding threaded rods and reinforcing steel in concrete, masonry or natural stone.The Anchor components and perfo sleeves for masonry can be found in the Injection System VMU range (see page 99-101)

The anchoring components from the Chemical Anchor V (see page 133), Injection System VMU plus (see pages 99-101) or Injection Adhesive VM (see page 129) product ranges can be used.

Both components are contained in the cartridge and mixed when dispensed through the static mixer. The Injection adhesive is injected directly into the drilled hole or perfo sleeve with a dispenser gun. The anchoring element is inserted into the filled hole (perfo sleeve) by hand. After the adhesive has cured, the anchoring element can have the load applied.

Advantages

  • –  suitable for most construction base materials as concrete, masonry, natural stone
  • –  Can be used as a repair mortar
  • –  sealed drill-hole
  • –  Opened cartridges can be re-used with a new static mixer
  • –  Suitable for many anchoring elements e.g. threaded rods,

    female-thread sleeves, concrete steel, hooks, screws etc.

 

Categories: ,

Description