Injection Adhesive VM-K

Description

Applications

A wide variety of fastenings in concrete or brickwork that do not require federal building office approval.

The Injection adhesive VM-K is a polyester-resin based injection mortar designed for bonding threaded rods and reinforcing steel in concrete, masonry or natural stone. By using a special perfo sleeve VM-SH (metal or plastic) a secure fastening is also possible in perfo- rated masonry.

The anchoring components from the Chemical Anchor V (see page 133), Injection System VMU plus (see pages 99-101) or Injection Adhesive VM (see page 129) product ranges can be used.

Both components are contained in the cartridge and mixed when dispensed through the static mixer. The Injection adhesive is injected directly into the drilled hole or perfo sleeve with a dispenser gun. The anchoring element is inserted into the filled hole (perfo sleeve) by hand. After the adhesive has cured, the anchoring element can have the load applied.

Advantages

– Styrene free: suitable for interior and exterior use – suitable for most building materials
– Can be used as a repair mortar
– sealed drill-hole

– Opened cartridges can be re-used with a new static mixer – Suitable for many anchoring elements e.g. threaded rods,

internally threaded sleeves, concrete steel, hooks, screws etc.