Injection System VMU plus

Range of loading: 0,3 kN – 202,0 kN
Concrete quality: C20/25 – C50/60
Brickwork: Solid and perforated brick
Material: Steel zinc plated, hot dip galvanized,

Stainless steel A4/316, Stainless steel HCR

Description

The injection system VMU plus is a new universal injection system for almost all applications and materials. Besides the use in non- cracked concrete and masonry, VMU plus is also approved for fixings in cracked concrete and for post installed rebar connections1). The new European Technical Assessment ETA-13/0909 includes 6 sizes of perforated sleeves up to 200 mm length and is approved in 15 different types of bricks. To complete the fastening, various anchor rods or internal sleeves can be used from the existing MKT-range (MU-A, VMU-IG, VM-A and V-A), as well as standard threaded rods or reinforcing bars. In perforated brick, a perfo sleeve is required.

Advantages

– Only one mortar for almost all applications, more flexibility, less inventory, greater application security

– approved for cracked (M8-M30) and non-cracked concrete (M8-M30)

– approved for post-installed rebar connections (Ø8-Ø321)
– Approved application in wet or water-filled drill holes (M8-M16) – approved for solid and perforated brickwork
– approved with standard threaded studs (strength test required) – base material temperature during installation -10°C (concrete)

to +40°C
– environmental temperature when completely cured -40°C

to +120°C (concrete)
– variable anchorage depth for less drilling eff orts
– fire test report
– opened cartridges can be re-used with a new mixer nozzle
– styrene-free vinyl ester resin
– Approved to use under seismic action according to the performance category C1

Additional advantages VMU plus Polar
– Fast and reliable curing even at low temperatures and minus de-

grees

– Approvedforcrackedandnon-crackedconcreteaswellasmasonry
even at icy -20 ° C
– Approved temperature range from + 10 ° C to -20 ° C for base mate-
rial and cartridge. Heating and keeping the cartridge warm before

installation is not necessary.
– One European Technical Assessment (ETA 11-0415 and ETA 13-
0909) for VMU plus and VMU plus Polar; therefore the Installation is possible from + 40 ° C to -20 ° C temperature without recalculation of the application.

Applications
Fastenings in cracked and non-cracked concrete:

Base plates, supports, mounting of joint tapes, shelves, brackets, railings, facade substructures, wooden structures, cable trays, etc.

Fastenings with rebars in cracked and non-cracked concrete – with
shear forces:
Shear connectors, wall connecting reinforcement, concrete overlay

Post-installed rebar connections1):

Ceiling and wall connections, structural reinforcement, structural complement building extensions, connection of balconies and canopies, subsequent attaching of „forgotten or misplaced“ reinforcing bars

Fastenings in Brickwork:

Canopies, door and window frames, facade substructures, battens, gates etc.