MKT

    • You've just added this product to the cart:

      Concrete screw BSZ A4

      Concrete screw BSZ A4

      Description: 

      Option 1 approved concrete screw BSZ cut a positive thread in the concrete when being screwed in and enable attachment to be made close to the edge through the expansion-free operating principle (=undercut). The approved adjustment enables subsequent align- ment to compensate for unevenness. The concrete screw BSZ is also ideal for temporary fixings since it is fully removable. Installation with an impact screwdriver means that you do not need to use a torque wrench. It is quick, reliable and reduces assembly errors.

      The concrete screw BSZs are available with connection thread and with a range of different head shapes for a wide variety of applica- tions. The versions with hex head have a special zinc flake coating

      Advantages

      – EuropeanTechnicalAssessmentforanchoringincrackedandnon- cracked concrete (Option 1) for concrete screws in sizes 6, 8, 10, 12 and 14

      • –  With up to 3 embedment depths, it is versatile for high loads or low levels of drilling and installation effort
      • –  EuropeanTechnicalAssessmentformultipleusefornon-structural systems in concrete and precast pre-stressed hollow core slabs for concrete screws in sizes 5 and 6
      • –  Approved for use under seismic conditions of category C1 (ø8 to ø14 for embedment depth hnom 3)
      • –  Approved for use under fire exposure (R30-R120).
      • –  Small drill hole diameter, small edge and axial gap
      • –  Rapid push-through installation with an impact screwdriver without torque regulation
      • –  No curing times, can be loaded immediately
      • –  Adjustable to compensate for unevenness (Ø8- Ø14 mm)
      • –  Can be fully removed
      • –  Wide range of possible applications through numerous variants
      • – Visually appealing through different head shapes
      • – Withoutapproval,canalsobeusedincompression-resistantnatural stone, various solid bricks and green concrete

      Applications

      To anchor moderate to heavy loads in cracked and non-cracked con- crete: Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings, etc.

    • You've just added this product to the cart:

      Concrete screw BSZ

      Concrete screw BSZ

      Description: 

      Option 1 approved concrete screw BSZ cut a positive thread in the concrete when being screwed in and enable attachment to be made close to the edge through the expansion-free operating principle (=undercut). The approved adjustment enables subsequent align- ment to compensate for unevenness. The concrete screw BSZ is also ideal for temporary fixings since it is fully removable. Installation with an impact screwdriver means that you do not need to use a torque wrench. It is quick, reliable and reduces assembly errors.

      The concrete screw BSZs are available with connection thread and with a range of different head shapes for a wide variety of applica- tions. The versions with hex head have a special zinc flake coating.

      Advantages

      – EuropeanTechnicalAssessmentforanchoringincrackedandnon- cracked concrete (Option 1) for concrete screws in sizes 6, 8, 10, 12 and 14

      • –  With up to 3 embedment depths, it is versatile for high loads or low levels of drilling and installation effort
      • –  EuropeanTechnicalAssessmentformultipleusefornon-structural systems in concrete and precast pre-stressed hollow core slabs for concrete screws in sizes 5 and 6
      • –  Approved for use under seismic conditions of category C1 (ø8 to ø14 for embedment depth hnom 3)
      • –  Approved for use under fire exposure (R30-R120).
      • –  Small drill hole diameter, small edge and axial gap
      • –  Rapid push-through installation with an impact screwdriver without torque regulation
      • –  No curing times, can be loaded immediately
      • –  Adjustable to compensate for unevenness (Ø8- Ø14 mm)
      • –  Can be fully removed
      • –  Wide range of possible applications through numerous variants
      • Visually appealing through different head shapes
        – Withoutapproval,canalsobeusedincompression-resistantnatural stone, various solid bricks and green concrete

        Applications

        To anchor moderate to heavy loads in cracked and non-cracked con- crete: Railings and handrails, shelves, wooden beams, supports and braces, brackets, pipeline and cable routes, suspended ceilings, etc.

    • You've just added this product to the cart:

      Highload Anchor SL

      Highload Anchor SL

      Range of loading: 5,4 kN – 66,8 kN
      Range of concrete quality: C12/15 – C50/60

      Description

      The Highload Anchor SL is a torque controlled sleeve anchor for through fastenings in non-cracked concrete. Three versions are avai- lable: SL-S with hexagon head screw, SL-B with hexagon nut and SL-SK with countersunk head screw. New: European technical approval, Option 7 for anchor size M10 steel galvanized. German approval in concrete strength class C12/15.

      Applications

      Medium to heavy duty anchorings of base plates, supports, pallet racks, brackets, railings in non-cracked concrete.

    • You've just added this product to the cart:

      Highload Anchor SZ A4

      Highload Anchor SZ A4

      Loads: 4,3 kN – 52,6 kN
      Concrete quality: C20/25 – C50/60

      Description : 

      The SZ A4/316 is the stainless-steel version of the tried and tested Highload anchor SZ. It also posesses ETA (Option 1) approval. High- load Anchor SZ is a high-performance through fastening Anchor System with three part expansion sleeve. This allows for smaller spacings and edge distances with high loads. The plastic compression ring ensures the clamping of the mounted piece to the work sur- face. Three different models of The Highload Anchor SZ are available: screw/washer SZ-S, Bolthead SZ-B and for a flush surface mounting SZ-SK. All models habe been shock-tested by the federal office for population protection in Bern/Switzerland.

      Advantages

      – High tension and shear loads
      – Screw/washer (SZ-S) model and flat head (SZ-SK) model for

      finished surfaces
      – Can be dismantled with a flush surface result

      (only the cone and expansion sleeve remain in the drill-hole) – smaller spacings and edge distances
      – ICC Evalution Service listing, USA
      – Fire protection approved (See Page 153)

      – Approved to use under seismic action according to the performance category C1+C2

      C1+C2

      Applications

      Medium to highload mounting in cracked and non-cracked concrete, e.g. trusses, railings, machines, scaffolding and consoles. Even in damp rooms and outdoors

    • You've just added this product to the cart:

      Highload Anchor SZ

      Highload Anchor SZ

    • You've just added this product to the cart:

      Hollow Core Anchor Easy

      Hollow Core Anchor Easy

      Range of loading:  0,7 kN – 4,3 kN
      Concrete quality: > C45/55 respectively B55; pre-stressed hollow concrete slabs

      Description : 

      The Hollow-Core Anchor Easy is a one -piece unit, specially designed for anchoring in pre-stressed hollow concrete slabs. Tightening the screw or nut pulls the expansion cone inside the anchor sleeve which keys into in the cavity or provides strong expansion in solid concrete. The approval Z-21.1-1785 allows the anchor to be installed even if the drill hole does not hit the cavity.

      Applications

      Suspension of ventilation, sprinkler system, false ceilings, brackets with threaded studs or screws, ducts, anchoring prefabricated panels on hollow concrete floors/ceilings.

      Advantages : 

      – Simple and flexible to use
      – Even approved if the drill hole does not hit the cavity – To be used with standard screws or threaded rods

      Note on the used screws:

      – The screws must have a sufficiently long thread in order to expand the anchor safely.

      – Recommended screws to be used DIN 933 / DIN EN ISO 898 – The required screw length is determined by the „minimum length of screw” (see table page 53) + the thickness of the

      fixture (tfix)
      – screws M6 at least have the strength 8.8

      M8 – M12 at least 5.8

      Note to the threaded stud and nuts used:

      – The minimum required stud length is determined by the „minimum length of stud” (see table page 53) + the thickness of the fixture (tfix), if exist

      – M6 threaded stud must have at least the strength of 8.8, M6 nut must have strength class 8

      – M8-M12 threaded stud must have at least the strength of 5.8, M8-M12 nut must have strength class 5

    • You've just added this product to the cart:

      Drop-in Anchor E A4/E HCR

      Drop-in Anchor E A4/E HCR

      Range of loading: 1,2 kN – 30,4 kN
      Range of concrete quality: C20/25 – C50/60

      Description

      The drop-in anchor E/ES A4 is approved as single anchor in non-crak- ked concrete as well as for redundant fastening use for non-structural applications in cracked and non-cracked concrete.
      The drop-in anchor E/ES is placed into the drill hole in pre-setting installation and expanded reliably by means of a manual or hammer drill setting tool. Using a detachable setting tool with a stop drill bit (ASW) allows for quick and efficient, high volume installations. Using the marking setting tool produces a visible marking on the anchor sleeve which confirms the correct installation.The use of coated screws is necessary in order to be able to remove the fixture.

      Advantages 

      -Approved for use as multiple fixing in cracked and uncracked concrete
      – Approved for use as single fixing in non-cracked concrete
      – Quick, rational and efficient installation due to the detachable setting tool with a stop drill bit (ASW)
      – Simple visual inspection with marking tool
      – Many possible applications due to the use of standard metric screws and threaded rods
      – FM approval for the installation of sprinkler systems (M10-M20)1)
      – Suitable for the installation of sprinkler systems according to the requirements of damage prevention VDS, GmbH (M8-M16)1) – Fire resistance tested in concrete C20/25 to C50/60

      Applications

      Attaching suspended ceilings, ventilation and sprinkler systems, structural steel, brackets, threaded rods.

    • You've just added this product to the cart:

      Drop-in Anchor ED-DW 15

      Drop-in Anchor ED-DW 15

      Description

      Drop-in Anchor with DYWIDAG® internal thread1) DW 15 for post installed threadbar (DYWIDAG®) connections. Suitable for concrete C12/15-C50/60 or hard natural stone. Safe installation if debris makes the thread impassible. The Drop-in Anchor does not protrude out of the concrete after removing the threadbar.

      Applications

      Multi-functional Anchor for concrete formwork. Cost efficient, quick fixing into existing concrete. Ideal for fixing one-sided formwork or temporary guardrails.

    • You've just added this product to the cart:

      Drop-in Anchor ED

      Drop-in Anchor ED

      Description

      The Drop-in Anchor ED is designed for temporary mounting or fastenings of machines that are to be moved at a later time.The ED M12 D version with reinforced anchor shell is especially designed for the fastening of core drilling machines.

      Applications

      Fastening of concrete processing tools such as core-drills and con- crete saws.

      Base Material: Drop-in Anchor ED

      concrete C20/25 – C 50/60

    • You've just added this product to the cart:

      Drop-in Anchor E / ES

      Drop-in Anchor E / ES

      Range of loading: 1,2 kN – 28,6 kN
      Range of concrete quality: C20/25 – C50/60

      Description

      The drop-in anchor E/ES is approved for redundant fastening for non-structural applications in cracked and non-cracked concrete. The anchor sizes with an embedment of 30 mm deep are also approved as single anchor in non-cracked concrete. The Drop-in anchors with an anchorage depth of 25 mm are, however, permitted in pre-stressed hollow core slabs.

      The drop-in anchor E/ES is placed into the drill hole in pre-setting installation and expanded reliably by means of a manual or hammer drill setting tool. Using a detachable setting tool with a stop drill bit (ASW) allows for quick and efficient, high volume installations. Using the marking setting tool produces a visible marking on the anchors- leeve which confirms the correct installation.

      Advantages

      • –  Approved for use as multiple fixing in cracked and uncracked concrete
      • –  Approved as multiple fixing in pre-stressed concrete slabs
      • –  Approved for use as single fixing in non-cracked concrete (Anchorage depth ≥ 30 mm)
      • –  Shallow drilling depth, thus low risk of hitting reinforcement strikes (Anchorage depth 25 mm)
      • –  Quick, rational and efficient installation due to the detachable setting tool with a stop drill bit (ASW)
      • –  Simple visual inspection with marking tool
      • –  Many possible applications due to the use of standard metric screws and threaded rods
      • –  FM approval for the installation of sprinkler systems (M10-M20)1)
      • –  Suitable for the installation of sprinkler systems according to the requirements of damage prevention VDS, GmbH (M8-M16)1)
      • –  Fire resistance tested in concrete C20/25 to C50/60

      Applications

      Suspensions in the area of heating, sanitary and ventilation, anchoring with threaded rods and screws, flat steel, profiled steel.

    • You've just added this product to the cart:

      Nail Anchor N

      Nail Anchor N

      Range of loading: 0,71 kN – 2,81 kN
      Range of concrete quality: C12/15 – C50/60

      Description

      The Nail Anchor N combines the advantages of a wedge anchor with
      an even easier installation. The Nail Anchor is simply hammered through the fixture into the concrete. Applying torque is not necessa-
      ry in the threaded versions. When the load is applied the Nail Anchor expands automatically and anchors to the concrete. – There is a nail head (N-K) version, a M6 external thread (N) version

      and a dual threaded sleeve M8/M10 (N-M).

      The Nail anchor in stainless Steel A4/316 and stainless Steel HCR is also tested according to ZTV and RWS tunnel temperature curve in cracked concrete. Load capacities see Page 154.

      Advantages :

      •  ETA approval for redundant fastenings in cracked and non-cracked concrete
      • –  Fast and simple mounting Reduced anchorage depth (25 mm) for reduced drilling costs
      • –  Very small edge distances and spacings
      • –  Loads up to 2,81 kN
      • –  only one product for two applications: dual thread M8/M10 (N-M)

      Applications

      Ceiling constructions, piping, cladding etc.

    • You've just added this product to the cart:

      Wedge Anchor B-IG

      Wedge Anchor B-IG

      Range of loading: 2,9 kN – 15,9 kN
      Range of concrete quality: C20/25 – C50/60

      Description

      The Wedge Anchor B-IG is the internally threaded version of the Eu- ropean approved Wedge Anchor B. It can be installed in normal drill holes without a setting tool. Expansion is achieved by tightening the screw. The fixture can easily be removed. Closer anchor spacing and edge distances than with drop-in anchors.

      Applications

      Medium duty anchorings where the use of an internal thread is required and/or anchor spacing and edge distances are closer than those needed for drop-in anchors: suspended ceilings, fastening of flat steel structures, ducts, ventilation systems, railings.

    • You've just added this product to the cart:

      L - Anchor B-W

      L – Anchor B-W

      Description

      The Wedge Anchor B-W is a self expanding hammer-in anchor, designed to attach steel reinforcing mats to existing concrete. The non threaded end is bent to hold the reinforcement mat in place.

      Applications

      Safe and fast fastening of reinforcing mats for sprayed concrete.

    • You've just added this product to the cart:

      Wedge Anchor B

      Wedge Anchor B

      Range of loading: 2,9 kN – 37,2 kN

      Range of concrete quality: C20/25 – C50/60


      Description

      The Wedge Anchor B hot dip galvanized, with ETA-Approval Option 7, offers all the advantages of the zinc plated version with a better corrosion protection. All sizes covered by the approval are assembled with a stainless steel expansion clip. Please see also page 26.

      Applications

      Indoor medium to heavy duty applications: metal constructions, channels, brackets, supports, cladding systems, hand rails, cable trays, ducts.

    • You've just added this product to the cart:

      Wedge Anchor B A4 / B HCR

      Wedge Anchor B A4 / B HCR

      Range of loading: 2,9 kN – 43,9 kN

      Range of concrete quality: C20/25 – C50/60

      Description

      The tried and tested wedge anchor B with European technical ap- proval, Option 7, is ideal for time-saving through fastenings in non- cracked concrete. Its two effective anchorage depths make it very flexible, reducing contacts with reinforcements when holes are drilled. The long thread also makes stand-off fastenings possible.

      The wedge anchor B M6 and HCR is also approved for multiple use for non-structural applications and similar fixtures in cracked and non-cracked concrete.

      Advantages

      – Approved for use in non-cracked concrete
      – Very high load limits and small spacings and edge distances
      – Two effective anchorage depths for greater flexibility
      – The smaller effective anchorage depth helps to reduce drilling and installation time
      – The standard effective anchorage depth is suitable for faste nings under the highest load limits and small spacings and edge distances
      – Particularly cost effective: shorter lengths with only one (smaller) anchorage depth
      – Suitable for surface, through, and stand-off fastenings
      – Fire tested in compliance with DIN 4102-2. Fire resistance ratings F30–F120
      – US approval (FM) for the installation of sprinkler systems (M10 to M16)
      – An impact head protects the thread from damage when it is driven into the drilled hole

      Applications

      Medium to heavy duty indoor and outdoor use, metal structures, brackets, machines.

      Wedge Anchor B M6 A4 and HCR: Multiple use for non-structural applications and similar fixtures in tunnels and or external at- mospheric exposures.

    • You've just added this product to the cart:

      Wedge Anchor B

      Wedge Anchor B

      Range of loading: 2,9 kN – 37,2 kN

      Range of concrete quality: C20/25 – C50/60

      Description

      The tried and tested wedge anchor B with European technical approval, Option 7, is ideal for time-saving through fastenings in non-cracked concrete.

      Its two effective anchorage depths make it very flexible, reducing contacts with reinforcements when holes are drilled.
      The long thread also makes stand-off fastenings possible. The hot dip galvanised version is also included in the approval, like the B-U version with the extra large washer for timber structures

      Advantages

      – Approved for use in non-cracked concrete
      – Very high load limits and small spacings and edge distances
      – Two effective anchorage depths for greater flexibility
      – The smaller effective anchorage depth helps to reduce drilling and installation time
      – The standard effective anchorage depth is suitable for fastenings under the highest load limits and small spacings and edge distances
      – Particularly cost effective: shorter lengths with only one (smaller) anchorage depth
      – Suitable for surface, through and stand-off fastenings
      – All sizes covered by the approval are assembled with a stainless steel expansion clip
      – Fire tested in compliance with DIN 4102-2. Fire resistance ratings F30–F120
      – US approval (FM) for the installation of sprinkler systems (M10 to M16)
      – An impact head protects the thread from damage when it is driven into the drilled hole

      Applications

      Metal constructions, channels, brackets, supports, hand rails, cable trays, ducts, shelf bases.

    • You've just added this product to the cart:

      Wedge Anchor BZ-IG A4

      Wedge Anchor BZ-IG A4

      Range of Loading: 2,0 kN – 18,5 kN

      Range of concrete quality: C20/25 – C50/60

      Description

      The fastening system BZ-IG A4 is the first approved (ETA-99/0010) wedge anchor for cracked concrete with internal thread. It combines the benefits of a mechanical anchor with an easy installation and the flexibility of an internal thread. For the first time it is possible to fasten balcony and stair railings or stadium seats using a countersunk head screw at favourable costs. Since this anchor system is also approved for use with hexagon head screws and standard threaded rods a wide range of applications is possible. Compared to a drop in anchor the fastening system BZ-IG A4 can carry significant higher loads, even in cracked concrete. The versatility of the MKT Fastening System BZ-IG breaks new ground in design and application.

      Applications

      Medium to heavy duty fastenings in cracked and non-cracked concre- te: Railings, chairs in sports arenas, facade substructures, suspended ceilings, ladders, doors, sprinkler systems, pipe hangers and all kinds of temporary fastenings.

    • You've just added this product to the cart:

      Wedge Anchor BZ-IG

      Wedge Anchor BZ-IG

      Range of Loading: 2,0 kN – 18,5 kN

      Range of concrete quality: C20/25 – C50/60

      Description

      The fastening system BZ-IG is the first approved (ETA-99/0010) wedge anchor for cracked concrete with internal thread. It combines the benefits of a mechanical anchor with an easy installation and the flexibility of an internal thread. For the first time it is possible to fasten balcony and stair railings or stadium seats using a countersunk head screw at favourable costs. Since this anchor system is also approved for use with hexagon head screws and standard threaded rods a wide range of applications is possible. Compared to a drop in anchor the fastening system BZ-IG can carry significant higher loads, even in cracked concrete. The versatility of the MKT Fastening System BZ-IG breaks new ground in design and application.

      Applications:

      Medium to heavy duty fastenings in cracked and non-cracked concrete: Railings, suspended ceilings, ladders, doors, sprinkler systems, pipe hangers and all kinds of temporary fastenings.

    • You've just added this product to the cart:

      Wedge Anchor BZ plus HCR

      Wedge Anchor BZ plus HCR

      Range of Loading: 2,4 KN – 70,6 KN
      Range of concrete quality: C20/25 – C50/60

       

      Description

      There has been further improvement to the performance and appli- cation range of the wedge anchor BZ plus HCR. The new European Technical Assessment replaces the previous European technical approval. Now its suitability has been verified for seismic loading, performance categories C1 and C2. Variants include a second effective anchorage depth, longer thread, and new sizes with a shorter overall length and only the one effective anchorage depth.

       

      Advantages

      – Approved under the building regulations with a new European Technical Assessment (Option 1)

      • –  Approved for use in cracked and non-cracked concrete
      • –  Approved for use under seismic loading, performance categories C1 and C2 (on demand for M8 to M20, maximum anchor length 210 mm)
      • –  Suitable for use in compression resistant natural stone (without approval)
      • –  Two effective anchorage depths for greater flexibility (on demand for M8 to M16, maximum anchor length 210 mm)
      • –  Anchoring with the smaller effective anchorage depth reduces drilling and installation time.
      • –  Anchoring with the standard effective anchorage depth is suitable for the highest load limits
      • –  Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16
      • –  Suitable for surface, through, and stand-off fastening
      • –  Fire tested in compliance with DIN 4102-2. Fire resistance ratings R30–R120
      • –  Suitable for sprinkler system installations complying with VdS requirements
      • –  FM approval for the installation of sprinkler systems (M10 to M16)
      • –  Shock approval by the Swiss Federal Office for Civil Protection

      Applications :
      Medium to heavy duty anchorings which are exposed to highly corrosive atmospheres with high concentration of sulphur dioxides, chlorides, humidity: attaching brackets, ventilation systems, suspen- ded ceilings, cable trays, in road tunnels, indoor swimming pools, etc.

    • You've just added this product to the cart:

      Wedge Anchor BZ plus A4

      Wedge Anchor BZ plus A4

      Range of Loading: 2,4 kn – 70.6 kn
      Range of concrete quality: C20/25 – C50/60

       

      Description

      There has been further improvement to the performance and appli- cation range of the wedge anchor BZ plus HCR. The new European Technical Assessment replaces the previous European technical approval. Now its suitability has been verified for seismic loading, performance categories C1 and C2. Variants include a second effective anchorage depth, longer thread, and new sizes with a shorter overall length and only the one effective anchorage depth.

       

      Advantages

      – Approved under the building regulations with a new European Technical Assessment (Option 1)

      • –  Approved for use in cracked and non-cracked concrete
      • –  Approved for use under seismic loading, performance categories C1 and C2 (on demand for M8 to M20, maximum anchor length 210 mm)
      • –  Suitable for use in compression resistant natural stone (without approval)
      • –  Two effective anchorage depths for greater flexibility (on demand for M8 to M16, maximum anchor length 210 mm)
      • –  Anchoring with the smaller effective anchorage depth reduces drilling and installation time.
      • –  Anchoring with the standard effective anchorage depth is suitable for the highest load limits
      • –  Particularly cost effective: the short “s” versions with only oneeffective anchorage depth in the sizes M8 to M16
      • –  Suitable for surface, through, and stand-off fastening
      • –  Fire tested in compliance with DIN 4102-2. Fire resistance ratings R30–R120
      • –  Suitable for sprinkler system installations complying with VdS requirements
      • –  FM approval for the installation of sprinkler systems (M10 to M16)
      • –  Shock approval by the Swiss Federal Office for Civil Protection

      Applications

      Medium to heavy duty anchorings which are exposed to highly corrosive atmospheres with high concentration of sulphur dioxides, chlorides, humidity: attaching brackets, ventilation systems, suspen- ded ceilings, cable trays, in road tunnels, indoor swimming pools, etc.

    • You've just added this product to the cart:

      Wedge Anchor BZ plus

      Wedge Anchor BZ plus

      Range of Loading: 2,4 KN – 96,8 kn
      Range of concrete quality: C20/25 – C50/60

       

      Description

      There has been further improvement to the performance and ap- plication range of the wedge anchor BZ plus. The new European Technical Assessment replaces the previous European technical approval. Now its suitability has been verified for seismic loading, performance categories C1 and C2. Variants include a second effec- tive anchorage depth, longer thread, and new sizes with a shorter overall length and only one effective anchorage depth.

      For timber structures, the BZ-UH plus variant is also available with the DIN EN ISO 7094 (DIN 440) washer.

       

      Advantages

      – Approved under the building regulations with a new European Technical Assessment (Option 1)

      • –  Approved for use in cracked and non-cracked concrete
      • –  Approved for seismic loads, performance categories C1 and C2 (M8 to M20, maximum anchor length 210 mm)
      • –  Suitable for use in compression resistant natural stone (without approval)
      • –  Two effective anchorage depths for greater flexibility (M8 to

        M16, maximum anchor length 210 mm)

      • –  Anchoring with shorter effective anchorage depth reduces drilling and installation time.
      • –  Anchoring with the standard effective anchorage depth is sui- table for the highest load limits
      • –  Particularly cost effective: the short “s” versions with only one effective anchorage depth in the sizes M8 to M16
      • –  Suitable for surface, through, and stand-off fastening
      • –  Fire tested in compliance with DIN 4102-2. Fire resistance ratings R30–R120
      • – Suitable for sprinkler system installations complying with VdS requirements

        – FM approval for the installation of sprinkler systems (M10 to M16) – Shock approval by the Swiss Federal Office for Civil Protection

        Applications

        Medium to heavy duty anchoring in cracked and non-cracked con- crete: Steel beams, base plates, channels, tracks, wood structures.

    • You've just added this product to the cart:

      Suction Bell

      Suction Bell

      For removing drilling dust when drilling or cleaning holes.

      Advantages

      – Easy handling, connection to a vacuum cleaner is sufficient
      – No mounting is necessary, because the suction bell sticks tight to

      floor, wall and ceiling by a strong vacuum
      – Prevents contamination and provide a clear visibility through

      almost dust-free drilling
      – Reduce respiratory complaints due to tiny dust particles by using

      a vacuum cleaner of the M-Class

    • You've just added this product to the cart:

      Hollow drill bit SB

      Hollow drill bit SB

      Description

      The hollow drill bit SB combines two steps in one: it drills and at the same time removes the drilling dust from the hole. As a result, it significantly reduces the dust created resulting in a cleaner work space and reduces air contamination. Thanks to its SDS shank and its 38mm suction pipe connection, it can be used universally and flexibly with any SDS hammer drill and industrial vacuum cleaners.

      Vorteile

      – 98% less dust than during conventional drilling processes
      – Permitted for use with approved anchors
      – Eliminates the subsequent cleaning process when installing mechanicals anchors
      – Easy handling, Insert in a hammer drill and connect to an industrial vacuum cleaner

      – Efficient dust extraction and drilling thanks to extra large vacuum holes

      – Optimum health and safety at the workplace, reduce respiratory complaints of dust particles by using an industrial vacuum cleaner of the M-Class

      – Can be used with all standard SDS-max and SDS-plus hammer drills as well as commercial industrial vacuum cleaners

      – Save money and time, because there is no dirt generated, so no need to clean up afterwards

    • You've just added this product to the cart:

      Chemical Anchor V-IG / V-IG A4

      Chemical Anchor V-IG / V-IG A4

      Range of loading: 5,2 kN – 25,1 kN
      Range of concrete quality: C20/25 – C50/60 Material:: Steel, zinc plated

      Stainless steel A4/316

      Description

      The Chemical Anchor system V-IG / V-IG A4 is the Internally Threaded Version of the Chemical Anchor system V. The system consists of a glass capsule and a threaded stud. The two components contained in the capsule are mixed while the threaded stud is driven in, forming a fast setting adhesive. This time proven anchoring system does not apply expansion forces and allows for very close anchor spacing and edge distances in non-cracked concrete. The drill hole is sealed by the adhesive.

      Applications

      No security-relevant heavy duty anchorings in non-cracked concrete of steel supports, base plates, consoles, anti-noise barriers.